Guides

Wi-Fi dead zones: fixes to try before you buy anything

Most weak Wi-Fi is a placement problem, not a speed problem. Try these in order.

By Vincenzo Turcotte, Shop Tech Support · Updated November 15, 2026

1. Move the router

Wi-Fi spreads out from the router like light from a bulb. Put it in the middle of the home, up high and in the open: on a shelf, not on the floor, not in a cabinet, not behind the TV. Brick, metal, mirrors, fish tanks and appliances block the signal. Moving the router a few feet often fixes a whole room.

2. Use the right band

Most routers broadcast two networks. 5 GHz is much faster but has shorter range. 2.4 GHz is slower but goes through walls better. Devices near the router should use 5 GHz; devices far away, and smart plugs and cameras, often work better on 2.4 GHz.

3. Restart and update

Restart the modem and router (unplug for 30 seconds). Then log in to the router's app or settings page and install any firmware update. Old firmware can be slow and less secure. While you're there, change the default admin password if it was never changed.

4. Check for interference

In apartments and townhomes, many routers share the same channels. Most routers pick a channel automatically; if yours doesn't, try channels 1, 6 or 11 on 2.4 GHz. Microwaves and some baby monitors also interfere with 2.4 GHz.

5. Test the right way

Run a speed test standing next to the router, then in the problem room. If it's slow next to the router too, the problem is your internet plan or modem, not the Wi-Fi.

When to buy something

  • Mesh Wi-Fi (two or three units) is the best fix for larger or multi-floor homes. It beats a cheap range extender, which often halves your speed.
  • If you can run a cable, a wired access point or wired mesh link is the fastest option.
  • A router older than about six years is worth replacing.

Rather have it done for you?

Free diagnostic, flat quote before any work, 90-day warranty. Plainfield and within 50 miles, or remote.

Home WiFi setup

More guides